0
Blue light refracted more than red or yellow. So your eye cannot focus on blue light. To focus it, you would need to focus beyond the infinite.
More specifically, you see shapes with your rods, which only detect the intensity of the light but not the color (they work on the yellowish-green wavelength). Colors are added to the picture by your three types of cones. To get color information the light do not need to be focused.
So as long as there are enough yellowish-green light in the object you are watching, the image will be sharp, regardless of color.
Nowadays green and blue LED lights are popular, and there are everywhere. These light does not contain any yellowish-green, only green and blue. Your eye cannot focus it, so all you see is a blurry image.
Anyway if you look carefully, you can see a blue aura around the white fluorescent lights too due to this.
What else can I help you with?
How do you do blue baby?
You turn Off the lights spin around three times look in to the mirror and say blue baby three times.
Where is the fog lights button to turn on the fog lights on the F-150?
You will need to look up by the dashboard. It is most likely that they will be located there are near the button to turn on the headlights.
What is wrong with a 1992 dodge Dakota when there is no turn signals or brake lights but the fuse is good is there another fuse to look for and where would it be and what it would look like?
Check bulbs - they are double filamented smaller is for turn and brake lights
What if your brake lights work but not the tail lights?
Look for a fuse labeled TAIL LIGHTS. There are 2 separate circuits, one for brake turn and flasher and the other is for tail lights.
How to find that a rear tail light is out?
Turn your headlights on. Walk to the back of the vehicle and look for any lights that are out. If the lights are all on. Have someone press the break pedal and look at the light again. If any lights are out replace them.
When was Turn out the Lights created?
Turn the Lights Out was created on 2007-03-20.
Why does your screen turn blurry on Windows 8 as soon as you put it on?
If the screen is blurry and remains blurry then it hasn't been calibrated correctly. If the blurriness is merely temporary, then it is most likely an indication of substandard components within the display.
Why Dashboard lights go off?
Turn up the brightness of the dash - look around - there is a dial to turn it up and make it brighter
What should do when drive a car at dusk?
Turn on the lights. Not everyone will have done this, so look carefully.
When was Turn the Lights On created?
Turn the Lights On was created in 1999.
What is look for the archway and a parchment will appear in Skullduggery Island?
Well, you look at the archway and it has engravings of the lights you have to turn on and off. After you do that then the parchment will appear.
How do you turn the lights on on a hp touchsmart 300?
look on the back unplug it then drop it on the ground then step on it after that plug it then it will turn on after it starts running again
