0
What else can I help you with?
How do you Remove hub cap on Saturn l series?
The hub caps are held on with the lug nut covers, these are plastic, and screw on the lug bolts if you use the lug wrench you can loosen the plastic hub cap lug bolts and be able to remove the hub cap without loosening the lug bolts. 2001 L200's have lug bolts rather than lug nuts.
What happens if you over torque pressure plate on 91 s10?
You could stretch the bolts, strip the threads out of the flywheel or break the bolts off in the flywheel.
Do you need to remove lug bolts to remove the wheel covers on a 2005 grand caravan?
Yes, unless you want to break the cover.
How many bolts on a Saturn tire?
My 2001 L200 has 5 lug bolts
How do you replace lug bolts on Isuzu trooper?
To replace lug bolts on an Isuzu Trooper, first, securely lift the vehicle using a jack and support it with jack stands. Remove the wheel by loosening the lug nuts with a wrench, then take off the wheel to access the lug bolts. Use a lug bolt extractor or a suitable tool to remove the old bolts from the hub, then insert the new bolts, ensuring they are properly aligned. Finally, reattach the wheel, hand-tighten the lug nuts, lower the vehicle, and then fully tighten the nuts to the manufacturer's specifications.
What causes a stripped lug nut?
Not aligning the threads up correctly and forcing the lug nut onto the wheel stud will strip the lug nut.
Can you tell me how to properly attach a chair lug to a piece of furniture?
To properly attach a chair lug to a piece of furniture, first, position the lug on the furniture where you want it to be attached. Then, use screws or bolts to secure the lug in place, making sure it is firmly attached. Finally, tighten the screws or bolts to ensure the lug is securely fastened to the furniture.
How do you remove Lug bolts on 68 Coronet?
pound them out with a hammer.
What is the lug nut spacing for a 1979 GMC Sierra Grande?
The 1979 GMC Sierra Grande lug nut spacing is 5-inches. The wheels have 5 lug bolts. Models before 1971 had 6 bolts,with a 5.5-inch spacing.
How do you remove the front fender from a 1988 Kawasaki EX500?
there is four bolts inside of the finder two on both sides they should be about one foot from the break drumb so good luck be careful with the bolts don't strip them.
What's the best lug wrench?
The best lug wrench is the cross shaped type with 4 different sockets. This is the only hand wrench that will apply enough torque on your lug bolts.
What is the lug pattern for a Pontiac vibe?
The lug pattern for a Pontiac Vibe is 5x100 mm. This means the vehicle has five lug bolts with a spacing of 100 millimeters between the center of the bolts. It's important to ensure that any replacement wheels or rims match this specification for proper fitment.
