answersLogoWhite

0

mabie they could be burning out.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Mazda 626 brake light?

brake lights dont work


The brake lights dont work on my 1989 Mercury Grand Marquis but all other lights work?

change the brake lights check the fuse check the brake light swtch


Brake lights dont work How do i fix them?

Check the fuse, the bulbs, and the brake light switch.


Lost brake lights?

all my lights work except my break lights, when i push on the peddle they dont go on can you help me?


In a 96 Corvette your brake lights dont work when you press the pedal only the 3rd brake light works I know the bulbs work when i arm or disarm the alarm?

There is a fault with the relay that go to the break lights. There may also be a fuse or connection in the fuse box itself causing this issue.


How do you permanently disable the daytime running lights on a 2000 Sienna?

Be for starting the van press down on your emergency brake one click then start the van. As long as you dont use the emergency brake your running lights should stay off. To permanently dissable them you could try defeeting that switch


Why does the brake lights stay on after you turn the headlights on and off on your ford?

I dont know because i dont have a FORD Check your brake light switch on the back of your brake pedal for adjustment.


The brake lights dont work but the normal lights in the back work what could be the problem?

Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...


Brake lights dont work on my 98 gmc jimmy Ireplaced bulb and I replaced switch under brake pedal lights still dont work?

Did you replace the fuse? have you checked the circuit board well the lights go on cause they tend to short out often


Saxo brake light switch?

look at the top of the brake pedal under dashboard you can usually adjust them so the brake lights dont stay on.


Your brake blinker and hazard lights dont work you changed the fuse in the fuse box you changed the brake light bulbs and you changed the the oob switch on the brake pedal what could it be?

Have an electrician check the wiring that goes to the brake lights in the trunk of the car.


What do you do if the brake lights work but not the tail lights?

i got a 2006toyota highlander my tail lights dont work but,every other light works please help me