Burnt out or loosely connected bulb.
The 2006 Honda Pilot has 4 headlight bulbs - 2 low beam and 2 high beam. See sources and related links below.
High beam-9005 Low beam-9006
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.
on two door 08 accord H11 low beam and 9005 high beam 4 doors 9006 low and 9005 high
replace the headlight. your indicator lamp inside the vehicle has nothing to do with your headlight working.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
The headlight has two filaments. One for the high beam and one for the low beam. The most likely reason the high beam is out is because the high beam filament is broken. Replace the bulb and it should fix it.
9006 for the low beam 9005 for the high beam
High beam light is out!
You need to change the light bulb, the high and low beam on some vehicles are contained in a single bulb. or you could have a bad connection on just that one light
9006x for the low beam and 9005x for the high beam.
9006 for low beam and 9005 for high beam