Defective starter drive? Broken tooth on flywheel/converter? My guess would be either the flywheel, or if the starter has been changed recently, maybe there was a starter shim that was not put back in.
If the noise changes pitch under acceleration and deacceleration I would suspect the carrier bearings or pinion bearings are shot. If there is no change under acceleration or deacceleration I would suspect an alxe bearing is shot.
This is because of rabbits communicating.
most likely the wheel bearings.
brake pads shot
please answer my question. Ford truck 1999 V8 4.6 L does not start of park but in neutral sometimes Why.
You may have a wheel bearing going bad or a brake dragging. Take it to a mechanic. I have found that if I can't identify something better than a "grinding noise" I had better let a mechanic look at it.
I have a 1999 Ford Explorer and I was told about a grinding noise before I bought it. He told me that it was because it needs a new wheel baring. * If the vehicle is standing in place and the wheel is turned and there is a noise it could mean you need to add power steering fluid to the unit.
hmmmm. sounds like u need to have the clutch looked at.
The most common reason for your 1999 Ford Ranger pickup truck not to start is a battery that needs to be charged. Charge the battery for a minimum of 15 minutes.
A grinding noise when opening or closing the sunroof on a 1999 Oldsmobile Aurora could indicate several issues. Common causes include a lack of lubrication on the sunroof tracks or mechanisms, misalignment of the sunroof glass, or worn-out gears in the sunroof motor. Additionally, debris trapped in the sunroof channel can also cause grinding sounds. Inspecting and addressing these areas can help resolve the issue.
Either your starter or ignition..
Do you always have this noise we you start the engine? Have you don any change of oil last time?