The dash lights in a 2000 Hyundai Tiburon may not work due to several reasons, including a blown fuse, a faulty dimmer switch, or burned-out bulbs. It's also possible that there's an issue with the wiring or a malfunctioning instrument cluster. Checking the fuse box and replacing any blown fuses is a good first step, followed by inspecting the dimmer switch and bulbs if the issue persists. If these components are functioning properly, it may require further diagnostic testing.
Under the steering wheel on dash.
www.crutchfield.com they come with dash kit and wire adapters at no extra cost. A big plus!
To change the interior and dash lights to blue in a 2006 Hyundai Tiburon, you'll need to replace the stock bulbs with blue LED bulbs. Start by carefully removing the dashboard panel and any surrounding trim to access the instrument cluster. Replace the existing bulbs with the new blue LED ones, ensuring they are compatible with your vehicle. Finally, reassemble the dashboard and test the lights to ensure they work properly.
under dash left side bolt to firewall with bracket tcm and seperate bcm boxes
first of all do you have any dash lights coming on.(is there power from the battery)
The brake light switch on a 2003 Hyundai Tiburon is typically located above the brake pedal, mounted on the brake pedal assembly. To access it, you may need to remove the under-dash cover on the driver's side. This switch is responsible for activating the brake lights when the pedal is pressed. If you're experiencing issues with your brake lights, checking this switch is a good starting point.
Yes, a color-coded wiring schematic for the wiring harness under the dash of a 2000 Hyundai Tiburon coupe can typically be found in the vehicle's service manual or repair guide. These manuals provide detailed diagrams that illustrate the wiring connections and color codes for various components. Additionally, online automotive forums or websites specializing in Hyundai vehicles may also have resources or shared documents containing this information. It's advisable to consult these sources for accurate and specific wiring details.
The Relay is in a hard to reach place under the dash, along with the fuel pump relay and some others.
The 2000 Hyundai Accent OBD 2 port is on rear of lower edge of dash; right of hood release
The connector is under the dash although a little harder to see. Hyundai will not release the code meanings for their cars, so your connecting the scanner will not give you much good information.
check the fuse for dash lights
Very carefully!