0
What else can I help you with?
1999 Oldsmobile Intrigue Service engin soon?
What does 'service engine soon' light mean on a 1998 olds intrigue?
How do you check the check engine light on a 2000 Oldsmobile intrigue?
With a scan tool.
How do you reset the traction control light on 2001 Oldsmobile intrigue?
To reset the traction control light on a 2001 Oldsmobile Intrigue, first, ensure that the vehicle is in good working condition, as the light may indicate a system issue. You can start by turning off the ignition, then disconnecting the battery for about 15 minutes to reset the system. Reconnect the battery and start the car; if the light persists, it may indicate an underlying problem that needs to be diagnosed with an OBD-II scanner. Always consult the vehicle’s manual for specific instructions or seek professional assistance if needed.
What makes the security light come on 99 Oldsmobile Intrigue?
In a 1999 Oldsmobile Intrigue, the security light can come on for several reasons, primarily related to the vehicle's anti-theft system. It may activate if the key is not recognized by the ignition system, if there is a fault in the security system, or if the vehicle's battery is weak or disconnected. Additionally, issues with the ignition switch or wiring can also trigger the light. If the light remains on, it may indicate a need for troubleshooting or reprogramming of the key or security system.
How do you reset the service engine light on 1999 oldsmobile intrige?
To reset the service engine light on a 1999 Oldsmobile Intrigue, you can use an OBD-II scanner to clear the trouble codes. Alternatively, you can disconnect the negative battery terminal for about 10-15 minutes, which will also reset the light. After reconnecting the battery, the light should turn off, but make sure to address any underlying issues that triggered it before doing so.
How do you reset the change oil light in a 2000 Oldsmobile Intrigue?
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
Why is the Battery light on after replacing alternator on Lincoln Navigator?
my battery is still on after changing battery and altnator
What size light bulb goes in the headlights of a 2002 Oldsmobile intrigue?
9006 low beam, 9005 high beam
How do you make the battery light to go out after replacing the battery?
If the light is still on then the problem was not the battery but was instead the alternator which is more than likely defective.
How do you reset pcs light on dash of 2000 olds intrigue?
To reset the PCS (Powertrain Control System) light on the dashboard of a 2000 Oldsmobile Intrigue, first, ensure that any underlying issues are repaired. Then, disconnect the negative battery cable for about 15 minutes to clear the trouble codes. Reconnect the cable and start the vehicle; the PCS light should be reset. If the light returns, further diagnostic work may be needed to address any persistent issues.
In a 2000 Oldsmobile Intrigue where in the trunk would the factory wired CD changer connection be?
Passenger side tail light corner is where my changer is
What would be the cause of a 2001 Oldsmobile intrigue service engine soon light to stay on?
hard fault code What is a hard fault code?
