0
In transmission line minimum 3 conductors are run in parallel. Every conductor has a flux which produce losses in other conductor which is run with parallel. So in the middle one conductor the losses is double in respect to other two conductors. At the end of the line the voltage of the middle one conductor is reduced from other conductors due to these losses.
The transposition tower is used to change the conductors. By using these tower we shift each conductor position. So we use these towers in long transmission line so that these losses becomes equal for each conductor. and voltage will be almost equal at the end of the transmission line.
Regards.
Vishal kr. Sharma.
(Simplex infrastructures ltd, Power Transmission & Distribution division)
What else can I help you with?
Why use transposition tower in long transmission tower?
Transmission towers are usually made of steel to help support over the head power lines. They are used in high voltage AC and DC systems and can come in different shapes and sizes.
Why use transposition tower in long transmission line?
A 'transposed' tower is one where the vertical sequence of lines on one side of the tower is red-yellow-blue (or A-B-C), while the sequence on the other side is blue-yellow-red (or C-B-A). The effect of this is to introduce some degree of cancellation between the magnetic fields -approximately inversely proportional to the cube of the horizontal distance away from the line, thus reducing the flux density of the magnetic field on either side of the line. In other words, it offers a means of reducing the exposure to the line's electromagnetic field. In the UK, most tower lines are transposed.
What is A in the nominal pi model of transmission line?
balanced pi model for a long transmission line.
What are the relay used in transmission line?
mho rerlay is used in long transmission lines
Which relay is used for long transmission line?
distance relay..........
How many max transmission voltage in India?
There are three types of transmission lines of India given follows ---- 1-long transmission line( which is used grid to power suppliers plant ) 2-medium transmission line ( which is used power supplier plant to the industry ) 3- short transmission line ( which is used transformer to the consumers )
Why the mho relay is used in long transmission line?
as it is most affected by arc resistance....
Could it be dangerous to connect an alternator to a long transmission line if the line had a high capacitance?
Yes. Because... If we connect an alternator to a transmission line of high capacitance the line voltage will increase and caused a line voltage difference, which does not satisfied the condition of parallel operation of same voltage rating. [By Akhtaruzzaman08]
What is ferrenti effect?
A rise in voltage occurring at the end of a long transmission line when its load is disconnected.
What is the cell phone named after?
The "cell" in cell phone is a shortened form of the word cellular. This refers to the type of transmission towers used to convey signals. Cell phones are simply radios that transmit on minute frequencies. The range of frequencies used are managed by the individual cellular providers (cell phone companies). These companies build and arrange transmission antennae (cell towers) in a way that transmission coverage from each tower overlaps those around it. This provides relatively (theoretically) seamless coverage. As long as the cell phone remains within line of sight of a transmission tower, and within the phone's transmission range, calls can be completed. In the days of analog cell phones (and this may still hold true today), the average transmission range for a cell tower was 15 miles over land, and 50 miles over water.
How far apart is the microwave tower from the other?
Microwave towers are normally set up in "Line of sight" pattern, as long as the other tower can be clearly seen from the antenna height (both), they work very well. On average they're set roughly about 30 to 40 miles apart depend upon terrain. The old AT&T towers "long line" towers were for sure.
How long is the tower bridg?
The Tower Bridge is 801 feet long.
