Yes, the 300 six cylinder was always basically the same. The newer motor will have fuel injection. You have to swap that or change out all the wiring.
what carbutor model engine fit in a 1994 ford f150 with a 5.8 lighting engine
Year for year and size for size they are a direct swap. In other words, a 5.4 from an F150 is the same as a 5.4 from an Expedition. There are also years that will interchange but I am not certain which ones are direct swaps. The Expedition is based on the F150 platform.
50-60psi key on engine off, 45-60psi key on engine running
I believe it should be close to the distributor at the front of the engine
advance your timing
Lower front of engine - follow the fuel line from the carb.
Im not sure, but why the hell would you want to do this?
The 4.6 liter engines are interchangeable. However, some modifications would have to be made to the pilot bearing and some other components.
The firing order of a 1984 Ford F150 with the V8-302 (5.0L) engine is: 1-5-4-2-6-3-7-8
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
No. Chevy and ford 1/2 ton wheels will not interchange.
i seriously doubt it. there have been several engine modifications to the the Triton v8s since 1999.