0
Yes, a 304 engine can be bolted to a Jeep 904 transmission. Both the engine and transmission come from the AMC family, which allows for compatibility. However, you may need to ensure proper bellhousing alignment and may require an adapter or specific mounts depending on the application. Always verify the specific model year and configuration for the best fit.
What else can I help you with?
Will a 304 engine fit in a 1998 TJ Jeep Wrangler?
Will a 304 engine fit in a 1998 TJ jeep wrangler?
What transmission can bolt to a 304?
The most common from the factory was the T3 transmission.
Do an amc 304 and ford 302 have the same transmission bolt pattern?
no a 258 amc and ford 302 have same bolt pattern
Will a 1972 scout 727 torque flight automatic transmission bolt up to a 1975 cj5 jeep with a 304 v8 without an adapter plate?
---No, the International and AMC have two completely different bolt patterns. AMC's 304 was built by AMC and the IH 304 was built by IH. Furthermore, the IH 727 was built to IH's specs, so more than the extra steels and clutches, tighter tolerances and bolt pattern will make it different. The throttle operates a linkage that mounts to the transmission and operates a throttle lever on the transmission, which in turn operates the valve body. In other words, the Chrysler 727 is vacuum modulated and the IH 727 is mechanical. You'll never get it to run right without the linkage and I hope you took time to unbolt rather than cut parts out with a torch. ---As for torque converters, I have no idea what would/wouldn't work with AMC. AFAIK, the only Chrysler torque converter that works on an IH 727, when bolting to an IH 304, is the 10". It all depends on which engine the 72 Scout had. If the 72 Scout had a 258 6-cylinder engine, which was made by AMC, then the transmission will have the same bolt pattern as the AMC 304. It was a stock engine available in the Scouts.
What is the firing order for a 1975 jeep cJ5 with a 304 and where do you start on the distributor and is the IH 304 the same engine?
Try Auto Zone.com I have overstayed my welcome there.
Will a t5 jeep transmission bolt directly to a jeep 304 v8 engine?
Yes, with some research............... The bell housing bolt pattern for all Jeep 304/360/401 V8s and straight six 232/258/242 is the same. The bell housing from a straight 6 (242/258) from 1983-86 will bolt to any Jeep post 63 v8. But, the crank shaft pilot shaft holes are many diffrent sizes. So, you need to measure the pilot hole; and be prepared to be creative in finding a bearing. NOT: You are not restricted to Jeep t-5; and can also use the othrr ford and Chevy verions; but you need to measure the pilot shaft length. Try the T5 from the 4cyl mustang; it has the right pilot shaft length and the first gear ratio is 4:1 rather than 3:1 on a T5 for a V8. .
What grade oil does a 1980 Jeep CJ7 with a 304 engine use?
i have used 5/30 in mine
Will a 304 from a 1975 cj5 bolt into a 1984 cj7?
yes. jeep stanardized bell housing bolt pattern in 71 i believe. just motor mounts and exhaust and radiator to worry about.
What frame engine mount goes on the passenger side of a 1979 Jeep CJ7 with AMC 304 engine?
For a 1979 Jeep CJ7 with an AMC 304 engine, the passenger side frame engine mount is typically a specific part designed to fit that configuration. You would need a mount compatible with the AMC 304 engine, often identified as a "passenger side motor mount" for the CJ7. It's advisable to check with Jeep parts suppliers or a service manual for the exact part number, as there can be variations based on production dates or modifications. Always ensure that the mount is designed for the AMC engine setup to guarantee proper fit and performance.
Where would you go to look up the numbers on a Jeep engine block to determine what the motor is?
Right above the motor mounts on the 304 V8 engines there is a large casting mark that says 304.
What is the point gap for a 1973 jeep cj5 304 v8?
The point gap for a 1973 Jeep CJ5 with a 304 V8 engine is typically set between 0.016 to 0.020 inches. This gap is crucial for ensuring proper ignition timing and engine performance. Always refer to the specific service manual for your vehicle for the most accurate specifications, as variations can exist based on engine condition or modifications.
What is the Point gap setting for a jeep CJ5 with a 304 engine?
The gap is 28 to 32 depending on how worn ur dizzy lobes are
