Yes it will , S14 transmissions also have an unnecessary crank angle sensor on top of the bell housing you can remove.
Does a sohc ka24de radiator fit onto a standard ka24de
Yes, all auto transmissions from 89 to 98 are the same for the 240sx and are interchangeable.
Yes, the bellhousing is a tad diffrent... But it will still bolt right up and get the job done. I am not 100% sure on the automatics, but the 5-speed's bolt right in.
I wouldn't know eactly, but here something may be it'd be helpful. 1. Find out if KA24DE and KA24E have the same engine block. if it is, then it should fit. 2. KA24DE and KA24E Trans Auto/5-Speed Fits Perfect. 3. You can easily find out just by looking at the oilpan gasket. Check out oil pan gasket for a KA24DE and KA24E and see if they match size and shape. Bolt size are usually/most likely to be same, since it IS KA series engine.. Hope that helps... goodluck.
It depends on if it is the KA24e or the KA24DE. I know that the KA24DE has 155hp stock. However the KA24e has less. I think about 140. The difference between the two is the DE has 2 cams and the e only has 1.
140hp the ka24de has 155hp stock
The KA24DE and KA24E are not the same engine block, though they share some similarities. The KA24E is a single overhead cam (SOHC) engine, while the KA24DE is a dual overhead cam (DOHC) engine. Both engines have a similar displacement of 2.4 liters and are part of Nissan's KA family, but the design differences in their camshafts and other components lead to variations in performance and characteristics.
of course you can. you can swap almost anything in the S-chassis. KA24E, KA24DE, SR20DET, RB20DET, RB25DET, RB26DET, LS1, 2JZ, 1JZ, the possibilities are endless. -ralphy BEATDOWN
Look at pictures, or know that 89-90 have a sohc ka24e and 91-98 have a dohc ka24de
A Z24i transmission is not directly compatible with a KA24DE engine due to differences in bell housing patterns and other mechanical specifications. The Z24i is designed for the older Z24 engine, while the KA24DE has distinct mounting and alignment requirements. However, with modifications and the right adapter, it might be possible to make them work together, but this is typically not a straightforward swap. It's generally recommended to use a transmission that is specifically designed for the KA24DE for optimal performance and reliability.
1990 is ka24e, single overhead cam, 1991 is ka24de, dual overhead cam.
~4.5 quarts in mine