0
What else can I help you with?
Why would a 93 Ford Escort wagon idle very rough when warm and have problems shifting after it is started and stopped?
Try changing your PCV valve it messes with the idle control. and shifting prob is likely in tranny and may not be related at all. try PCV valve and have your tranny serviced.
What is a slave valve?
automatic transmissions have a slave valve to control shifting
Would a broken Hose to modulator valve cause shifting problems on a old ford with a c4?
Absolutely!
Would the pcv valve effect shifting on your 2005 1500 ram?
Not likely. It would mainly cause a poor running engine.
What can you do about your 1994 Pontiac transport not shifting until it is warm?
could be a bad modulator valve but i would change filter and fluid in transmission first
What s the difference between an 8 valve and a 16 valve head gasket?
The year, make and engine info would be helpful.
What is the difference between check valve and nonreturn valve?
There is no difference between check valve and NRV, both are same
Can i put a pressure valve ona well pump pipe?
Your meaning is unclear. Your system will already have pressure switch, -why would you need a pressure valve?- or are you unaware of the difference between a valve and a switch.
Saturn 2001 sl automatic has hard shift when shifting gears?
Most likely pressure control solenoid in transmission....Easily tested with proper scan tool ALSO try changing EGR valve. Will REALLY HELP!!!! I just changed mine, all my hard shifting and jerking in reverse went away.
How many times do you pump the clutch on a BMW?
What are you doing shifting gears or changing the slave cylinder? If your going thou the gears 1 for 1 and for the ceilnder till all the air is out but make shore to open and close the valve as your pumping it.
What is the difference between solenoid valve and control valve?
I believe that servo is motorized and solenoid is magnetically activated.
What is wrong with my 94 ford escort that sticks in second gear when driving.?
If it a manual transmission it could be fluid level/needs changing, shifting fork/linkage or syncro issues. If it is an automatic, the fluid level/condition can affect shifting, also if the valves in the valve body are sticking. The transmission can also just need rebuilding, clutches are worn.
