0
What else can I help you with?
When a master cylinder is how can you tell?
A master cylinder should be replaced when it can no longer provide the pressure needed for the brakes to operate. You can tell it is failing when the pedal becomes soft.
Do you have to replace the master cylider if the slave cylinder has been replaced in a 1993 Saturn?
The Slave Cylinder and the Master Cylinder control totally different systems. The Slave has to do with the clutch, and the Master has to do with the brakes. They have nothing in common.
Spongy peddle after replaced master cylinder on 1996 Taurus WHY?
You need to "bleed" the brakes at each wheel. R
2001 Kia spectra Mushy brakes after new calipers drums and master cylinder replaced whats the issue?
Air in system? Remove and bench bleed master cylinder Bleed lines and calipers
Where is the abs?
The ECU for the ABS brakes is attached to the Master cylinder for the brakes.
Why are your brakes not reacting?
master cylinder is sticking
How do you fix the rear wheel brakes from locking up?
If the rear wheel brakes are locking up on a vehicle they should be thoroughly checked. The master cylinder may need to be replaced on the car.
On a 93 ford tempo master brake cylinder are the front brakes controlled by the lines on the bottem of the master brake cylinder or the sides?
. If you have the 4-port master cylinder, the bottom ports go to the rear brakes & the upper side ports go to the front brakes.
Where is the ABS ECU?
The ECU for the ABS brakes is attached to the Master cylinder for the brakes.
What all does a master cylinder control on a car?
just the slave cylinder, for your brakes.
How do you know when you need a new master brake cylinder?
A brake master cylinder? If you are losing brakes or brake fluid.
Replaced master cylinder and booster on 2002 f-250 still brakes go to floor WHY IS THIS AND What is the box where the brake lines run into after the master cylinder?
The brakes will have either:Another problemNeed to be properly bled.The additional component is probably the anti lock brake servo. This component requires a special bleeding procedure.
