Key or ignition tumbler is worn. If you cannot remove the key, then you will have to remove the tumbler assembly and replace it. If you can get the key out, then try a key that is not used very often. If it works, have a duplicate made of that key and destroy the other key with the problems.
move the steering wheel while attempting to turn ignition key
How can I take out the key from the ignition key in a BMW 325i 2001. I can turn on the engine but the key doesn't come out when I turn off.
this is caused by ignition lock cylinder failure, you will have to replace the ignition lock cylinder and key.
turn key over turn key over
My 92 has a safety feature where you have to turn the key to the off position, and then you must push the key in and turn one more time in order to release the key.
I usually take the key out, turn it, and put it back in ignition to start
Wrong key?
Use a screw driver to turn it on and off lol its not gonna come out
Your ignition also locks your steering and at times you need to move the steering wheel a little and at the same turn your ignition key. Then you should be able to turn the key and start the engine. Hal
I am not sure what causes this, but I have had times when my ignition key would not turn. The solution to the main problem is to turn the steering wheel slightly. This usually allows the ignition key to turn.
it is either the key is worn out or the key cylinder in the ignition is worn out.
is it a ford? push the key in further and then turn it