look just under the edge of the seat where it meets the carpet. you will see two bolts. one on the left, one on the right. they should be half inch bolts, or thirteen mm.remove them, and the seat will lift out.
The back seat of a Chevy Cavalier is a split bench seat. The release for the seat is located in the trunk behind the split. Simply pull the release and fold the seat down.
removal 1998 kia sephia back seat
NEED help is there a diagram with the bolts in the backseat of a 1998 chevy cavalier?
2000 sonata rear seat removal
Force the lower end of the bench seat back toward the trunk to release to clips at the bottom of seat and lift out--You will find either clips or screws at the lower end of the upper portion of seat--releasse these and lift upper section of seat should release from locking clips allowing removal of upper section Force the lower end of the bench seat back toward the trunk to release to clips at the bottom of seat and lift out--You will find either clips or screws at the lower end of the upper portion of seat--releasse these and lift upper section of seat should release from locking clips allowing removal of upper section
The back seat on a Ford F150 FX4 can be removed by locating the straps in the back part of the seat. Pull up on the straps to remove the seat.
Pull up the back of the seat first, then theres clamps basically in the middle of the right and left seat, at the very front of the seat -- pull the seat straight up and itll pop out!
In the back seat, under the front leading edge of the seat will be some 13mm bolts. this should make ease of the back seat removal.
To remove the back of a Graco booster seat, locate the release button or lever on the back of the seat and press or pull it to detach the back from the base. Follow the manufacturer's instructions for proper removal.
To remove the rear seat from a 2002 Chevrolet Cavalier, first, locate the rear seat bottom's release levers, typically found at the front edge of the seat. Pull the levers to release the seat bottom and then lift it out. For the rear seat back, look for bolts or clips at the base of the seat, remove them, and then tilt the seat back forward to release it from the vehicle. Always refer to the owner's manual for specific instructions and safety precautions.
No, You must remove the fuel tank.
Push back on the lower section of the seat (difficult) to release locking clips Lift bench up and out