On a 1992 Mazda MX-6, the brake fluid reservoir is located on the driver's side of the engine compartment, near the back of the engine bay. It is typically mounted on or near the master cylinder, which is attached to the brake pedal assembly. The reservoir is usually a translucent plastic container, allowing you to easily check the fluid level.
The brake fluid in a 1992 Ford Escort gets put in the brake fluid reservoir. This is normally located on the master cylinder.
DOT ( 3 ) brake fluid
DOT 3 brake fluid
DOT ( 3 ) brake fluid
brake fluid container right side behind battery.
Dot 3 brake fluid
To refill the brake fluid for a 1992 Acura, you need to remove the cap on the brake fluid reservoir. Add fluid until the dipstick measures full, or the line on the reservoir that says 'full' is touched by the brake fluid.
Switch is defective or out of adjustment.
Low brake fluid in master cylinder, fault in brake fluid level sensor, parking brake is on, parking brake sensor fault.
DOT3
your brake fluid is probably low or very dirty.