0
What else can I help you with?
How to replace broken wheel bolt?
Drive the old broken wheel stud out, and drive a new one in. Purchase the new stud at any auto parts store.
If stud on your starter that connects to your battery broke can it be replaced?
Yes, by a shop that rebuilds starters.
How do you change a rear wheel stud on a au?
On most vehicles you take off the tire, put the lug nut back on the stud and drive it out with a hammer . When you put the new stud in you can line it up and drive it in with a hammer or pull it through with a few washers and the new nut.
How do you put a mirror on a wall?
Find a stud using a stud finder. You can buy them at the hardware store. Drive a nail and then hang the mirror off it.
How to properly screw into a stud?
To properly screw into a stud, first locate the stud using a stud finder. Once located, mark the spot and use a drill to create a pilot hole slightly smaller than the screw. Then, drive the screw into the stud using a screwdriver or drill until it is secure.
How do you replace the front wheel hub assembly on a PT Cruiser?
First off, it has to be pressed on with a 1 to 5 ton press. So for a DIY person it doesnt make much sence going through the whole procedure. Sorry. But if your hell bent on doing it, message me. A wheel lug stud broke off do you have to replace the hub or does the stud drive out?
It's not safe to drive my car anymore one of my lug nut broke off from my one side of my wheels is there a way to fix this?
yes, you can try removing the tire then the brakes and then the wheel and see if your studs pop out or not. The other thing you can do it to just drive without it as most cars with 5 or more lug nuts can work just fine missing one.By the way what kind of car is it and how many good lug nuts remain? While it's okay to drive a short distance missing 1lug nut, it's not recommended that you go very far.Many tire stores will replace a wheel stud for a reasonable price and if you don't feel comfortable doing the job yourself, that might be a good option. As for doing it yourself, disassemble the wheel, brake, whatever is necessary to get clear access to the back of the stud. Drive the stud out using a large hammer and a drift punch if necessary. Then install the new stud. You'll need to seat the stud by using the lug nut, then with the wheel on, tighten the lug nut to continue to seat the stud. Check it several times over the next couple days since a new stud can pull itself in a little further as you drive.
How do you change the rear wheel studs on a 1992 Chevy S10 Blazer?
if studs are broke off take tire and brake drum off . take a heavy hammer hit broken stud drive it back toward backing plate. install new one push it in as far as you can. put drum on and the rim .as you tighten the lug nut the stud will snug up. snaps on
How do you replace a rear wheel stud on a Nissan Titan?
Remove wheel, brake caliper, brake disc, parking brake shoes etc. Drive out broken stud, replace with new stud. Replace above in reverse order.
How do you replace a wheel stud on a kia Sophia?
Drive out the old one with a drift and a hammer and press in a new one. You can buy a new wheel stud at most auto supply stores.
How do you put stud in a sentence?
After November 1st, some counties require studded snow tires on cars that drive over the mountain pass.
How do you remove a broke bolt?
Insert small bar having enough length in contact with bolt and then do stud arc-welding between bar & bolt.Then turn it as per thread direction.Thus we can remove broke bolt.
