On most vehicles you take off the tire, put the lug nut back on the stud and drive it out with a hammer . When you put the new stud in you can line it up and drive it in with a hammer or pull it through with a few washers and the new nut.
Yes. BA wheel will fit an AU. All Falcons have the same stud pattern, just a different offset. 1967 XR - 1997 EL = 0 offset 1998 AU onwards = +35 offset
To replace the rear wheel bearing on a 1998 AU Falcon, first, lift the vehicle and remove the rear wheel. Next, detach the brake caliper and rotor to access the wheel hub. Remove the hub assembly by unbolting it from the axle, then press out the old bearing and press in the new one. Finally, reassemble the components in reverse order, ensuring everything is securely tightened and properly aligned.
NO they changed after EF AU an BA are they same
Multiply AU by 92,955,807.3 to get miles.
It is the Pont au Change: http://en.wikipedia.org/wiki/Pont-au-Change
Au chomage means out of work in French. There is no difference between 'un homme au chomage' (a man out of work) and 'une femme' (a woman) au chomage.
13 july 2001
Under the RHS of the steering wheel, next to the hood release
au falcon dosent have a distrutor cap they run 6 pin coil pack
Je changerai ma viec'est la phrase 'Je change ma vie' au futur.
The first thing to do when replacing an AU Falcon steering wheel is to disconnect the battery as there is an air bag that contains a small explosive material that is potentially dangerous. Next, find the screws that hold the steering wheel cover, located on the sides of the steering wheel (under round plastic covers that can be removed with a small screw driver). Use a Torq #9 screwdriver to remove the two screws underneath these covers. Carefully lift out the steering wheel hub & airbag. Unplug the airbag. Use a Torq #9 screwdriver to remove the center steering wheel bolt. Use a steering wheel puller per factory specifications to remove the steering wheel.
Use the same switch for the front wipers. Once the front wipers are switched on, the rear wiper will come on as well. However, a reverse twist of the switch would turn on just the rear wiper.