0
What else can I help you with?
What is the difference between heel and toe contact on a final drive?
They refer to different parts of the gear tooth. Toe is near the outside edge, heel is nearer the center.
What contain the transmission and the final drive gear assembly?
The transmission casing contains the transmission and final drive gear.
Is the final drive the same as the final gear?
No, the final drive and final gear are not the same, although they are related. The final drive refers to the entire assembly that transmits power from the transmission to the wheels, often including the differential. The final gear, on the other hand, is a specific gear within that assembly that determines the gear ratio and affects the vehicle's speed and torque.
How do you figure final drive gear ratio?
To calculate the final drive gear ratio, divide the number of teeth on the driven gear (typically the ring gear in the differential) by the number of teeth on the driving gear (usually the pinion gear). For example, if the ring gear has 40 teeth and the pinion gear has 10 teeth, the final drive gear ratio would be 40:10, which simplifies to 4:1. This ratio indicates how many times the driveshaft must rotate to turn the wheels once, influencing acceleration and top speed.
What is final drive gear?
The final drive gear is a crucial component in a vehicle's drivetrain that transfers power from the transmission to the wheels. It typically consists of a set of gears, including a ring gear and a pinion gear, which reduce the rotational speed while increasing torque. This gear ratio is essential for optimizing performance and efficiency, especially in different driving conditions. In essence, the final drive gear helps determine the vehicle's acceleration and overall handling characteristics.
What is a final drive pinion?
A final drive pinion is a gear component in a vehicle's drivetrain that works in conjunction with the ring gear to transmit power from the driveshaft to the wheels. It is typically located within the differential assembly and plays a crucial role in reducing the rotational speed and increasing torque. The pinion gear engages with the larger ring gear, allowing for smooth power transfer and helping to achieve the desired wheel speed. Proper functioning of the final drive pinion is essential for optimal vehicle performance and handling.
What is the mph for each gear of a 9 speed Rockwell or Eaton transmission?
Depends on the final drive ratio.
What is a gear drive?
In a vehicle, a driving gear is the gear which is driven by the engine. The driving gear helps control the speed the vehicle is in.
What are the speed to gear ranges on a 10 speed transmission?
Depends on the gear ratio of the transmission, and the rear end gear ratio of the vehicle. 10 speeds have been available with final drive ratios of .73, .74, .86, .87, and 1 (direct drive).
Which gear turns faster if the driving gear is larger than the drive gear?
The drive gear will turn faster.If the driving gear was twice the size of the drive gear, the drive gear would rotate twice for every revolution of the said driving gear.
Which is positive drive rope drive or flash drive or vdrive or gear drive?
Gear drive
What is the gear ratio for a 1999 Honda valkyrie?
The final drive gear ratio for the Valkyrie is 2.833 from what I have found in 5 different sites..(though I don't have those site available at the moment) I also found that the goldwing has a 2.75? final gear ratio, and different 4th and 5th gear ratios..wonder if they'll interchange??
