answersLogoWhite

0

REMOVE THE TOP MOTORMOUNT .TO ALLOW THE ENGINE TO COME UP WITH A SUITABLE JACK UNDER MOTOR REMOVE THE SERPENTIN BELT .. AND THEN REMOVE 15MM BOLT ON TENSIONER ...TO INSTALL NEW TENSIONER ,.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you replace power steering belt on 1996 dodge neon?

Since There is no tensioner pulley you have to loosen your alternator.


Change timing belt on a 1995 dodge neon?

if you are wanting change intervals than its every 60,000 miles and you should check and replace the hydraulic tensioner and pulley


Where is the AC and power steering belt tensioner located on a Dodge Neon?

The alternator will move in and out to tighten the belt and the PS pump will do the same


When do you replace the timing belt for a Dodge neon?

By 100,000 miles for sure.


How do you change belt tentional pully on a dodge neon 2001 moddl?

To change the belt tensioner pulley on a 2001 Dodge Neon, first, ensure the engine is off and cool. Remove the serpentine belt by using a wrench to rotate the tensioner pulley, then slide the belt off. Next, unbolt the old tensioner pulley from its mount and install the new one, securing it with the bolts. Finally, re-route the serpentine belt around the new tensioner and ensure it is properly aligned before starting the engine.


How do you fix the timing in a 1995 single cam 2.0 dodge neon?

AnswerThe timing is controled by the sensors and the computer, it can't be adjusted.You can if the timing belt is stretched! Replace your timing belt and the hydraulic tensioner and it should repair the bad timing.


What is the solution for a '96 Dodge Neon that squeaks loud periodically when air is on?

Replace or tighten the A/C belt. If equipped with a serpentine belt, replace it.


How do I know if I have a mechanical or hydraulic timing belt tensioner on 2000 dodge neon?

The only way to know which style tensioner you have is to remove the crank pulley and timing cover and look.


How do you replace idler pulley on a 2003 dodge neon?

To replace the idler pulley on a 2003 Dodge Neon, first, ensure the engine is off and cool. Remove the serpentine belt by loosening the tensioner pulley with a wrench. Next, unbolt the idler pulley from its mounting bracket using the appropriate socket. Finally, install the new idler pulley, reattach the serpentine belt, and ensure everything is secure before starting the engine.


I need to replace my alternator in my 1997 dodge neon and want to know if this is something I should do myself The last time I replace alternator was in your 1978 camaro?

If you can get at it, disconnect your battery and go for it, Basicaly the same procedure but with a serpentine belt and auto tensioner i presume.


On a 1996 dodge neon what causes a squealing sound when you turn on the ac?

Loose or worn A/C drive belt. Tighten or replace. If serpentine belt, replace.


How do you loosen a drive belt tensioner on a 2004 dodge neon?

Most likely use a socket and longer extension bar then loosen by pulling clockwise