ABS brakes should have no effect on engine idle, but a bad power brake vacuum booster would have an effect on engine idle.
you cannot adjust the iddle on a 84 fiero. the iddle control is made by the computer. there is a air control selenoid on the left of the throttle body. the selenoid controle the iddle air flow. to make sure the selenoid is working properly, you can remove the air boll and filter so you can see the point if the selenoid. when the engine is passing from high revolution to iddle, the selenoid will move. if it moves it is probably in good working condition. if the iddle of the engine is too high, you might have a vacumm leek somewhere. check all the vacumm hoses for proper working condition.
The idle sensor on a 1991 S10 4.3 can be located at the engine bay.
Yes. Engine, Trans, and ABS have an affect on the speedo reading.
You need to have the engine and abs checked for codes.
The ABS sensors are in each wheel - in the hub assemblies, they are not in the engine.
Unless you damaged or disconnected the ABS while doing it, it will not affect the ABS.
Yes, it has several. Engine, transmission, ABS, airbag, body, etc.Yes, it has several. Engine, transmission, ABS, airbag, body, etc.
The ABS relays are located inside the ABS pump just behind the passenger side headlight in the engine bay.
The Mazda ABS relay switch is located on the firewall in the engine compartment. The ABS relay switch will be on the passenger side of the firewall.
Cardio exercise has a wonderful effect on your health. However, it won't really affect your abs. You'll need to do exercises specifically to tone the abdominal muscles to have a positive affect on that region.
Yes. The abs, transmission, and HVAC computers all get info from the engine VIN.Yes. The abs, transmission, and HVAC computers all get info from the engine VIN.
The tire will not affect the abs system but it will more than likely affect the traction control system. It could give a faulty read out due to the treadwear.