This is for a 1999 Hyundai Elantra Wagon. The general process may be similar between models, however I am not sure.
1. There is a screw in the middle of each handle, take this screw out and put it somewhere you won't lose it.
2. With the screw removed, the handle can be popped out of the panel about a centimeter.
3. Slide a flat-headed screw driver into the gap you've just created, above the handle. Inside the door there are two metal rods which have a 90 degree bend at the end of them which slides into the handles. There is a plastic clip on each rod that secures it in place on the handle. With the screw driver, pop the clips off of the rods.
4. With the clips off, the rods are held in place within the handles only by friction. The plastic handles are not very strong, so be careful while prying the rods out of the handle.
5. With the rods removed, the handle should be completely removed. To install the new handle, simply trace your steps backwards.
With a hammer and pry bar.
where are the spark plugs for a Hyundai sonata that the year is 1999
Go to hmaservice.com
sounds like a bad ground
Push the door panel in around the window handle and use a screwdriver or a piece of wire with a hook to pull the clip off....it's in behind the handle.
how to replace the starter for a 1999 Hyundai elantra
yes it will, there are slight modifications with the sides that will need to take place, but it is nothing somone with a moderate back ground in car maitnence cant handle
by pooting a led lights
Hyundai Card was created in 1999.
Hyundai Equus was created in 1999.
how to time a 1999 Hyundai elantr glsAnswerhow to set timing belt on Hyundai elantra gls figure
Drill it out and when replacing use a screw.