With a little salt and pepper.
There is one 15mm nut on the back side of the tensioner. You have to get at it from under the vehicle. It is just below the end of the exhaust manifold. It is fairly easy if you use a long extension and a flex socket.
You have to remove the belt first, this is easiest with a tensioner tool. Then the nut that holds it to the bracket is on the backside of the tensioner and needs to be done from the bottom.
The oil capacity on a 2000 chy. Voyager is 4.5 quarts.
How do you change the air filter on a 2000 voyager 3.0?
where is thermostat in 2000 chrysler grand voyager ??
Plymouth made a Voyager minivan from 1990 to 2000.
I had this problem in my 92 Plymouth Voyager. You need to replace the tension pulley. They get old and become out of alignment.
In order to put in a new belt tensioner in a 1992 Plymouth voyage you must first release the belt from the stock tensioner and remove. Next install the new belt with the stanchions given.
bad tensioner, replace the belt tensioner/pulley. I had the same problem.
The belt is self adjusted by way of a tensioner.
You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.
Where is the radiator fan relay at on a 2000 Plymouth voyager