answersLogoWhite

0

There is one 15mm nut on the back side of the tensioner. You have to get at it from under the vehicle. It is just below the end of the exhaust manifold. It is fairly easy if you use a long extension and a flex socket.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Can you take the tensioner pulley off without taking the tensioner off with it on a Dodge Grand Caravan 2000?

Yes, on a 3.3 or 3.8 the serpentine belt pulley does come off the tensioner arm but the bolt is left thread not right handed.


How do you eat the tensioner on a 2000 voyager?

With a little salt and pepper.


How do you change the thermostat in a grand voyager?

where is thermostat in 2000 chrysler grand voyager ??


Where is the tension pulley located on 2000 Blazer LS?

Look on the passenger front side of the engine, you will see pulley attached to a short arm with a square hole. That is the tensioner and tensioner pulley


How do you replace tensioner pulley on 2000 dodge grand caravan with 3.0 engine?

You unbolt the old one (one bolt) then fit new. Now refit the belt.


How do you replace a tensioner pulley on a 2000 Oldsmobile intrigue?

To replace the tensioner pulley on a 2000 Oldsmobile Intrigue, first, disconnect the negative battery terminal for safety. Then, use a wrench or socket to relieve tension on the serpentine belt by turning the tensioner pulley counterclockwise. Remove the old tensioner pulley by unbolting it and then install the new pulley in its place, securing it with bolts. Finally, reattach the serpentine belt, ensuring it's properly aligned, and reconnect the battery terminal.


How do you release the belt on 2000 model gu patrol to remove alternator?

Loosen the tensioner pulley. The tensioner pulley will slide to the right. This will loosen the alternator belt. So it can be removed.


Dodge Caravan 2000: The v-belt is out of alignment - seems like the tensioner is not lined up with the other pulleys - How can this be fixed?

I had this problem in my 92 Plymouth Voyager. You need to replace the tension pulley. They get old and become out of alignment.


Routing of a serpentine belt on a 2000 leganza?

I just did one today for my uncles 2000 Leganza 2.2. The trick is that the belt goes around the tensioner then the crankshaft pulley. It should make an s from the bottom of the alt. pulley to the tensioner then to the crank.


How do you adjust the tensioner on a 2000 Dodge Grand Caravan?

You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.


What is the firing order for a 2000 Chrysler grand voyager?

1,2,3,4,5,6


How do you replace a tensioner pulley on a 2000 Grand Am SE?

Just replaced it myself you gota take the alternator off loosen two bolts that hold the tensioner on and pull it out.Don't loosen any bolts on the powersteering under the tensioner.Remember to disconnect the battery first.