0
How do you replace tensioner pulley on 2000 dodge grand caravan with 3.0 engine?
Wiki User
∙ 10y ago
You unbolt the old one (one bolt) then fit new. Now refit the belt.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How do you change the serpentine belt on a Dodge Caravan?
What you need is a ratchet 15mm socket. Losen the idler then slide off the serpentine belt off. There should be a diagram for routing the belt if not draw a diagram before removing it. Replace the serpentine belt crank it 2 or 3 times but don't start the engine. The 4th time start the engine this time the as the engine is idling eyeball the belt agaisnt the tensioner idler and crank pulley make sure the serpentine is algined. A Note: Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this will release the tension on the belt, or in the case of installing a new serpentine belt, allow you to get it where it belongs. This is the case on my 1997 Dodge Caravan, and probably other year makes. Best of luck- Bryan 1993 Dodge Grand Caravan: Rotating the tensioner pulley's bolt clockwise was the way to replace my belt. By the way, the tensioner pulley in my van was one of the smaller ones in the middle of the whole system, attached to a silver arm coming off the tensioner. Good luck...
Where is the belt tensioner on a 2003 Dodge Grand Caravan Sport How do you loosen it to change the serpentine belt?
what you need is a ratchet 15mm socket. Losen the idler then slide off the serpentine belt off. There should be a diagram for routing the belt if not draw a diagram before removing it. Replace the serpentine belt crank it 2 or 3 times but don't start the engine. The 4th time start the engine this time the as the engine is idling eyeball the belt agaisnt the tensioner idler and crank pulley make sure the serpentine is algined. That's It. Bill A Note: Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this will release the tension on the belt, or in the case of installing a new serpentine belt, allow you to get it where it belongs. This is the case on my 1997 Dodge Caravan, and probably other year makes. Best of luck- Bryan 1993 Dodge Grand Caravan: Rotating the tensioner pulley's bolt clockwise was the way to replace my belt. By the way, the tensioner pulley in my van was one of the smaller ones in the middle of the whole system, attached to a silver arm coming off the tensioner.
Replace Serpentine belt on Monte Carlo 3.1?
Loosen the tensioner pulley on your Monte Carlo 3.1 liter engine. Slide the tensioner pulley to the right. The serpentine belt can be removed. Put the new serpentine belt on and slide the tensioner pulley to the left.
How to replace the tensioner pulley on a 2001 galant gtz?
Remove air box, pulley is located just under attached to engine block. Should remove bolts take off belt, and replace pulley and belt.
Serpentine belt tensioner 1997 3.8 caravan?
It will be the smooth pulley(s)-not ribbed.
Where is the tensioner pulley on Dodge Caravan 98?
its on the left side. its the easyest pully to see.
Where is the idler tensioner pulley on a 98 dodge Dakota?
The 1998 Dodge Dakota tensioner pulley will be the top pulley on the left-hand side of the engine. The tensioner pulley will be able to slide back and forth.
How remove tensioner pulley on a 2002 camaro 3.8?
One bolt holds the tensioner to the engine, take it off to get the tensioner off and then you can get to the bolt that holds the pulley to the tensioner.
Location of belt tensioner on dodge Dakota truck?
Facing the engine the tensioner will be on left side of engine. There is an idler pulley that looks like the tensioner. The idler will have a smooth surface but the tensioner will have grooves on the pulley & should below the idler. If the tensioner is making noise etc it is prob just the tensioner pulley (grooved one) & you can get just the pulley. Big savings.
How do you change the serpentine belt on a 2003 Chrysler Town and Country 3.8L?
what you need is a ratchet 15mm socket. Losen the idler then slide off the serpentine belt off. There should be a diagram for routing the belt if not draw a diagram before removing it. Replace the serpentine belt crank it 2 or 3 times but don't start the engine. The 4th time start the engine this time the as the engine is idling eyeball the belt agaisnt the tensioner idler and crank pulley make sure the serpentine is algined. That's It. Bill A Note: Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this will release the tension on the belt, or in the case of installing a new serpentine belt, allow you to get it where it belongs. This is the case on my 1997 Dodge Caravan, and probably other year makes. Best of luck- Bryan 1993 Dodge Grand Caravan: Rotating the tensioner pulley's bolt clockwise was the way to replace my belt. By the way, the tensioner pulley in my van was one of the smaller ones in the middle of the whole system, attached to a silver arm coming off the tensioner.
How do you tighten a v belt on 97 caravan se 30?
there should be an adjustable tensioner pulley.
