One bolt holds the tensioner to the engine, take it off to get the tensioner off and then you can get to the bolt that holds the pulley to the tensioner.
Loosen the tensioner pulley. Pushed the tensioner pulley to the left. The serpentine belt will come loose. Remove the belt. Reverse the process to install the new serpentine belt.
The 2002 Toyota Camry belt tensioner pulley can be loosened by loosening the pulley nut. The pulley nut is located in the center of the pulley.
You don't. If it has stretched too much for the tensioner pulley to handle, you need a new belt. Or, if the tensioner pulley is not applying correct tension, the tensioner pulley must be replaced.
How do I remove the rear shocks on a 2002 chevy camaro convertible?
Loosen the tensioner pulley. Remove the alternator belt. Remove the wiring cables from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
That is the idler pulley. The other pully to the bottom left of that one is the tensioner pulley.
The 2002 TrailBlazer with the 4.2 Inline 6 uses a serpentine belt. The tensioner pulley and arm can be "relaxed" using a breaker bar or a wrench on the tensioner pulley to make is slack. www.trailvoy.com All the answers are in our enthusiasts forum!
push the tensioner back with a 14mm, take off the belt, take off the pulley assembly
You would typically use a serpentine belt tool or a breaker bar with the appropriate socket to loosen the tension pulley on a 2002 Cavalier. These tools help you apply enough force to release tension on the pulley so you can easily remove or install the serpentine belt.
You don't. The serpentine belt tension is automatically maintained by the tensioner pulley, which is an idler pulley located on the passenger side of the system and looks like it doesn't drive anything. If the belt tension is incorrect, the tensioner pulley must be replaced. If the question meant 'how to release tension from the belt' (for removal, etc.), this is done by applying the correct size socket wrench to the tensioner pulley's center nut and rocking the pulley away from the belt.
put a socket on the tensioner pulley and pull on it until there is slack then just slip it off.
The power steering unit and the alternator are both driven by the serpentine belt. Loosen the tensioner pulley and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.