you need a gear puller so you don't damage it.
To replace the harmonic balancer on a 1995 Honda Passport, first disconnect the negative battery cable and remove the drive belts. Then, use a suitable puller to remove the old harmonic balancer from the crankshaft. Install the new harmonic balancer by aligning it properly and using a torque wrench to secure it to the specified torque. Finally, reattach the drive belts and reconnect the battery cable.
To remove the harmonic balancer from a 1995 Pontiac Bonneville, first disconnect the negative battery cable and drain the engine coolant. Remove the drive belts, then use a harmonic balancer puller to detach the balancer from the crankshaft. To install the new harmonic balancer, ensure it's properly aligned, then press it onto the crankshaft and reassemble all components in reverse order. Finally, reconnect the battery and refill the coolant.
3800? It needs a new harmonic balancer.
it is behind the harmonic balancer.
To remove the harmonic balancer on a 1995 Honda Passport, first, disconnect the battery and remove any belts obstructing access. Use a socket wrench to remove the crankshaft pulley bolt, then employ a harmonic balancer puller tool to extract the balancer from the crankshaft. Ensure to follow safety precautions and consult the vehicle's service manual for specific torque specifications and procedures.
It is behind the Harmonic balancer at the bottom pulley on your motor.
on a 1994 it's behind the harmonic balancer
counter clockwise
IT requires a special tool, a three jaw puller.
Yes
Most likely the water pump.