0
What else can I help you with?
How do you replace the timing cover on a 1981 Chevrolet Malibu?
You will need to remove the fan and the water pump. You may have to remove the radiator to be able to have room to remove the balancer. Remove the bolt in the center of the crankshaft. Using a puller , pull off the balancer. Remove the bolts surrounding the timing. Pry the timing cover from the block. I do not know your reason for doing this but if you are wanting to remove the seal you DO NOT have to remove the timing cover.
1997 dodge neon sohc timing diagram back cover on cam is broken how do i line it up?
Remove cam gear, remove broken back cover, replace back cover, replace timing belt.
How do you remove the battery box cover on a 2015 Impala Chevrolet?
To remove the battery box cover on a 2015 Chevrolet Impala, first ensure the vehicle is turned off and the keys are removed. Locate the battery cover, which is typically secured with clips or screws. If it has clips, gently pry them open with a flathead screwdriver; if screws are present, use the appropriate screwdriver to remove them. Once unfastened, lift the cover off carefully to access the battery.
Where do you add the oil in a Chevrolet inline 6 250?
remove the air breather on the valve cover add oil there
How do you change the light for the rear license plate on a 1999 Chevrolet Camaro?
Remove the cover using a tork bit.
Why is Rattle coming from valve cover?
Loose, broken, or worn valve train component. Remove the valve cover to find the problem.
How do you remove the heater pipe from the engine block?
how to remove timing cover with heater pipe attached 92 olds 88 3.8l
How do you fix a broken valve cover bolt when you cant grab the broken bolt still in the engion?
I have good news and I have bad news. First the good news - Christmas is coming. Now the bad news - It seems the only way to remove a broken bolt from an engine block is to drill it out - see you local mechanic for further details
Where is the oil pump on a 6.0 Chevrolet?
It is on the front snout of the crankshaft behind the timing chain cover. It bolts to the front side of the engine block. In order to replace it, one would have to remove the water pump, harmonic balancer/crank pulley, and timing cover on front of engine just to access the pump. Then the oil pan would have to be removed to access and remove the oil pick tube.
How do I replace the thermostat on a 1993 Chevrolet Corsica?
ok you look on the front of the block....take the thermostat cover off..then take the old one out and put the new one in and put the cover back on.....
How do you fix a broken valve cover bolt on a Chevy 1500 with a 5.3?
Remove the broken bolt and replace it with a new one. There are several ways to remove that broken bolt. You can remove the valve cover and weld a nut to what is left of the bolt, wait for it to cool off then unthread the broken bolt. You can also drill out the center of the broken bolt and use an easy-out. You can also drill into the broken bolt with a left handed drill bit, sometimes the drill bit will catch and spin out the broken piece. I would go with the first suggestion.
How do you remove plaster from concrete block walls?
With a masonry chisel. It may be easier to cover it with a new surface.
