0
What else can I help you with?
Can a 350 v8 harmonic balancer be used on 4.3 vortec v6?
NO.
How do you replace harmonic balancer on 1993 f 350 with 351 motor?
first remove serpintine? fan belt then remove large bolt in middle of harmonic balance. this bolt usually has left hand thread next with a harmonic pulley ,puller, remove harmonic balancer.when removing this, there is a key in the balancer and shaft if a new key did not come with new balancer,make sure not to loose the old one install new balancer with key.use the bolt to pull balancer up tight where it needs to be and use proper torque on bolt
How to remove a harmonic balancer from a 350?
you should use a tool called a harmonic balance puller. the balancer came off in two pieces and the second piece that's still on the crank shaft won't come off
Will a 350 harmonic balancer work on a 4.3L V6 and if not why?
No, a 350 harmonic balancer will not work on a 4.3L V6 because they have different specifications such as size, weight, and balance. Using the wrong harmonic balancer can cause vibrations, premature wear on engine components, and potential engine damage. It is important to use the correct harmonic balancer for your specific engine.
Where is a crank sensor on a 99 Chevy silverado 1500 4wd?
If it has a 350 Vortec engine, then it is on the left bottom side of the timing cover behind the harmonic balancer. If it has the genaration II engine then it is behind the starter. You will need to remove the starter to be able to see it.
What size is a 350 Chevrolet harmonic balancer?
It should be 8 inch
Will a Chevy 305 harmonic balancer work on a 350 motor?
yes
Is the harmonic balancer the same for an 85 and 86 Chevy 350?
yes.
Does a 1997 chevrolet 5.7 vortec 350 have a crank shaft sensor?
YES, It is bolted in the lower passenger side of the timing cover behind the harmonic balancer It is held in place with 1 10mm bolt
Chevrolet 350 harmonic balancer bolt torque?
60 ft-lbs
Can you use a harmonic balancer off a Chevy 350 on a Chevy 307?
Yes.
Can you use a 305 Sm block harmonic balancer on a 350 Sm block?
Yes.
