The crankshaft spins counter-clockwise on a 1997 Honda. To remove the bolt for the main pulley spin the bolt clockwise.
Take the crankshaft bolt off,big bolt holding the crankshaft to the engine,can be a little difficult pull the crankshaft out and the bolts should be right there,go in through the wheel well,youll have to remove your passenger tire first
1998 Nissan pathfinder crankshaft pulley bolt is right handed.
Remove belt, remove crankshaft bolt with air impact tool, remove balancer pulley with a balancer puller. Then you will be able to get to it.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
remove center bolt and use the required puller
Counter clockwise
With a pneumatic impact gun.
Turn the bolt to the left to remove it.
To remove the crankshaft pulley bolt on a VW Jetta, first ensure the vehicle is securely raised and supported. Use a socket wrench with a proper-sized socket to fit the bolt, and if it’s tight, you may need to use a breaker bar for added leverage. To prevent the crankshaft from turning, you can insert a tool into the flywheel's access hole or use a crankshaft holding tool. Once the bolt is loose, carefully remove it along with the pulley.
To remove the crankshaft pulley bolt on a Vauxhall Vectra 2.2DTi, first, ensure the vehicle is secure and the battery is disconnected. Then, use a suitable socket and a breaker bar to loosen the bolt, but you may need to hold the crankshaft in place with a flywheel locking tool. If the bolt is particularly stubborn, applying penetrating oil and allowing it to sit for a while can help. Finally, once loose, remove the bolt and pulley carefully.
Counter Clockwise.