location of the ecu on 1993 Lexus LS400
In a 1992 Lexus LS400, the ECU fuse is located in the engine compartment fuse box. Specifically, you should look for a fuse labeled "EFI" or "ECU," typically found in the upper right section of the fuse box. It's advisable to consult the owner's manual for the exact location and specifications, as fuse designations can vary. Always ensure the ignition is turned off before checking or replacing fuses.
In a 1994 Lexus LS400, the brain, or engine control unit (ECU), is typically located under the dashboard on the driver's side. Specifically, it is often found behind the kick panel, which may require removing some trim or covers for access. This ECU is responsible for managing various engine functions and performance. Always consult a service manual for precise instructions and diagrams for your specific vehicle.
Basically it is behind the glove box. Remove the glove box and the lower dash panel on the passenger side and the ECM should be there.
In a 1995 Lexus ES300, the Engine Control Unit (ECU) is located under the dashboard on the driver's side, specifically behind the kick panel. To access it, you may need to remove the kick panel cover and some wiring harnesses. Ensure the battery is disconnected before attempting to handle the ECU for any repairs or replacements.
where is the ECU on Daewoo Matiz 1999
It is found on the pass. side behind the dashboard under panel. You have 2 remove the guard under the pass. side dash first then then their are three screws you have two remove under the glove compartment with a 10m wrench. Then pull the guard forward just so that you can feel the ecm on the other opp. side remove the wireplugs a about three more 10m screws holdin the ecm in place an the ecu is yours.
To change the ECU in a Lexus IS300, first disconnect the negative battery terminal to prevent electrical shorts. Locate the ECU, typically found under the passenger side dashboard or in the engine compartment, and remove any covers or connectors. Carefully unplug the old ECU and replace it with the new unit, ensuring all connectors are securely fastened. Finally, reconnect the battery and start the vehicle to verify that the new ECU functions correctly.
ecu?
To remove the ECU from a 1999 Ford Fiesta, first, ensure the ignition is off and disconnect the car battery to prevent any electrical short. Locate the ECU, which is typically positioned behind the dashboard or near the driver's side. Disconnect the wiring harness and any mounting screws or bolts securing the ECU in place. Once detached, carefully remove the ECU from its housing.
The ECU is located inside the footwell of the passenger side of the cabin. To find it remove the carpet from underneath the passenger side dash.
behind instrument cluster, you don,t need to remove the ecu it could be reflashed with a device called TCODE, iam sending you a link in case you need more info http://www.pinaslocksmith.com/infolexus.html