To replace the license plate bulb on a Citroën C2, first, open the rear hatch and locate the light assembly for the license plate. Remove the plastic cover or housing by gently prying it off with a flat tool or screwdriver. Take out the old bulb by twisting it counterclockwise, then insert the new bulb in the same manner. Finally, reattach the cover, ensuring it's securely in place.
how do you replace a honda crv licence plate bulb on a 2004
Take it to a Buick Dealership
License plate like bulb, on a Citrogen Picasso, can be changed by pushing the bulb in and turning at the same time. The bulb will come out. Insert the new bulb.
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
My owner's manual advises not to attempt to replace licence plate bulb, should take it to dealer to avoid damaging the vehicle, sounds weird but there it is for what its worth. Cheers Ron calgary...
Take out the plastic lens cover over the bulb. You will need a small screw driver to push and it should pop out. Replace the bulb (Bulb: W 5 W). Replace the lens which should click in place.
Replace front sidelight bulb on Citroen C4 how to?
I presume you mean number plate lights on the car boot.Take out the plastic lens cover over the bulb. You will need a small screw driver to push and it should pop out. Replace the bulb (Bulb: W 5 W ). Replace the lens which should click in place.Check this link for photo and instructions which will help: http://citroenc3owners.com/citroen-c3-tips/topic30.htmlRead more: http://wiki.answers.com/How_do_you_change_license_plate_bulb_on_a_citroen_c3#ixzz1bJhbE1Tx
how do i replace a h/lamp bulb on citroen c2 o/s.or easy way to remove headlamp
yes
Locate the bulb holder under the bonnet, then turn the bulb by about a quarter and pull out. Replace with the same bulb (W5W 12V)
To replace the license plate light bulb on a Ford F-150, first, locate the light assembly, typically found above the license plate. Use a flat-head screwdriver to gently pry off the light cover, then remove the old bulb by twisting it counterclockwise. Insert the new bulb by twisting it clockwise until secure, and replace the light cover. Finally, test the new bulb to ensure it’s working properly.