how do you replace a honda crv licence plate bulb on a 2004
Take it to a Buick Dealership
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
I have a 94 not sure if they are the same but behind the license plate was mine Good luck Answer Improvement (Sept 5. 2010) Remove 4 license plate screws and licence plate Remove 4 hex head screws that hold the license plate/backup light assembly Rotate the license plate/backup light assembly around 180 degrees so you can get to the light bulb holders Carefully turn bulb holders 1/4 and remove bulb holder Carefully remove old bulb and replace with new bulb (#194) Reverse these step to reassemble
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
My owner's manual advises not to attempt to replace licence plate bulb, should take it to dealer to avoid damaging the vehicle, sounds weird but there it is for what its worth. Cheers Ron calgary...
To change the license plate bulb in a 2001 Cadillac DeVille DTS, start by opening the trunk and locating the license plate light assembly. Carefully pry off the light cover using a flathead screwdriver or similar tool. Remove the old bulb by twisting it counterclockwise and replace it with a new bulb, ensuring it’s securely in place. Finally, snap the cover back on and test the light to ensure it's working.
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
License plate like bulb, on a Citrogen Picasso, can be changed by pushing the bulb in and turning at the same time. The bulb will come out. Insert the new bulb.
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
I had to open my trunk, look inside and find butterfly/thumb screws. I un-fastened them and dropped down the entire light bank including the licence plate. One big strip. You can then access the lights from the back of the strip.
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.