Get Three Feet or Closer to the Truck Hold The Lock and Unlock Buttons at the Same Time Until the Truck Chirps
You can use the two keys to reprogram the car remote of 2000 VW Jetta.
Yes, you can add and reprogram remote keys for a 2003 Alero with power locks, even if you don't have the original remote keys. You will need access to the vehicle's onboard diagnostics (OBD) system and a compatible key programming tool or software. Follow the specific programming procedure outlined in the vehicle's service manual, which typically involves a series of steps to enter programming mode and synchronize the new remote with the car's system. If you're unsure, it's best to consult a professional locksmith or dealership for assistance.
To reprogram the remote key for a Mercedes-Benz ML 350, first, ensure you have all keys available, as the process will erase old keys. Insert the key into the ignition and turn it to the "On" position without starting the engine. Then, press the "Lock" button on the remote for several seconds until you hear a confirmation sound from the vehicle. Finally, turn the key back to the "Off" position and remove it; the remote should now be reprogrammed.
ford has to do that
The dealership (if it is one of those keys which require a coded chip reprogram).
yes
I'd think so, but you can move and reprogram your keys to how ever you want
See the dealer or you'll have him see you as you are locked out with the antitheft going off. Question why do I have to see a dealer? I have the master key, found instructions on the Internet for a 2004 to delete existing keys except master, than how to reprogram smart keys and valet key. Not sure if the same programming instructions work for a 2005? (I have been able to program all of my other smart keys fo other "dealer only" monogramming .
No, you can have a transponder key without the remote.
To change the input on a Sanyo TV using a Dish remote, first, ensure that the Dish remote is programmed to control your TV. Then, press the "TV" button on the remote, followed by the "Input" or "Source" button. Use the arrow keys to navigate through the input options and select the desired input by pressing "OK" or "Select." If the remote doesn’t respond, you may need to reprogram it to ensure compatibility with your Sanyo TV.
Call local police dept. or locksmith
keys have to be reprogram to the cluster