To reset the oil change light on a 2009 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal five times within five seconds. Then, turn the ignition off and start the engine to ensure the oil light has been reset. If it remains on, repeat the process.
To reset the maintenance required light on a 2013 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off, then back on, and the maintenance light should be reset. If successful, the light will no longer be illuminated when you start the vehicle.
A Lexus ES 350 tire pressure light will reset on its own. Tire pressure lights will turn off when the tire is at the proper pressure.
To turn off the tire rotation light in your Lexus ES350, start by turning the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. This should reset the light. If the light remains on, consult your owner's manual or visit a dealership for further assistance.
If sensor is good will reset itself if proper air pressure in a few miles
The low tire pressure warning light, on a Lexus IS 250, can be reset by adjusting the tire air pressure. The recommended tire air pressure is 30 pounds per square inch.
In a 2013 Lexus ES350, the odometer reset button is typically located on the instrument panel, near the speedometer. To reset the trip odometer, press and hold the button until the display resets. If you're looking for the trip reset button specifically, it may be a small knob or button on the dashboard cluster. Always refer to the owner’s manual for precise instructions and details.
The light should turn off after the tire(s) is inflated
To reset the tire pressure light on a Lexus GX 470, start by ensuring that all tires are inflated to the recommended pressure. Then, turn the ignition key to the "On" position without starting the engine. Press and hold the tire pressure warning reset button, usually located beneath the steering column, until the light blinks and turns off. Finally, start the engine, and the light should remain off if the tire pressures are correct.
Get it serviced
You can reset a maintenance light on a 92 Lexus SC400 by disconnecting the battery. Leave it disconnected for 10 to 15 minutes.
To reset the low tire pressure light on a Lexus SC430, first ensure all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the tire pressure warning reset button, usually located below the steering wheel, until the light blinks and then turns off. Finally, start the engine to confirm that the light remains off.