In a 2013 Lexus ES350, the odometer reset button is typically located on the instrument panel, near the speedometer. To reset the trip odometer, press and hold the button until the display resets. If you're looking for the trip reset button specifically, it may be a small knob or button on the dashboard cluster. Always refer to the owner’s manual for precise instructions and details.
Just did it on my 2007. First make sure the trip odometer is set to Trip A. While holding in the odometer reset button, push to engine start button twice (but not with your foot on the brake pedal). After continuing to hold the trip OD button for about 4-5 seconds you'll see the Oil Maintenance Req'd message disappear. Sounds simple.
The ODO trip button is a small black button on the lower left side of the display shield.
The Trip Odometer is normally reset by pushing and holding the reset button in. The odometer can not be reset.
With the car off you will need to:1. (without putting your foot on the brake) hit the start button twice.. Then2. Hit the odometer stem to make it go to trip a (where the odometer reads.)3. Turn the car back off and then hold in the odo pegand4. Hit the start button twice again ( without your foot on the brake) and it will reset.
Where is trip odometer reset button on vauxhall insignia
You can not reset the odometer. The trip meter can be reset by holding down the button.
Press the RESET button.
1. Make sure your trip odometer is on Trip A. 2. With the car turned off, press and hold the "Reset" button for the trip odo. 3. Foot off the brake, press the start button twice while holding the reset button and wait for it to reset.
To reset the trip odometer on a 2009 Buick LaCrosse, locate the trip odometer button on the instrument cluster. Press and hold the button until the trip odometer resets to zero. If your model has a digital display, you may need to toggle through the options using the button until you reach the trip odometer. Release the button once it's reset.
To reset the oil change light on a 2009 Lexus ES350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal five times within five seconds. Then, turn the ignition off and start the engine to ensure the oil light has been reset. If it remains on, repeat the process.
For Maintenance Required warning light on 2008+ Highlander Hybrid: Start from car in OFF mode. Keep foot off brake pedal, press START/STOP botton twice, reset odometer A & B. While in odometer A, press & hold odometer reset button and simultaneously press START/STOP button to turn off. Press & hold odometer reset button and simultaneously press START/STOP button twice. Wait for the indicator bar to complete reset cycle and then release odometer reset button.
With the ignition off, press and hold in the reset button for the trip odometer, then turn the ignition on. Hold the trip odometer reset button until the service reminder indicator starts flashing (about 10 seconds). Release the reset button for the trip odometer within 4 seconds.