0
To reset the motor lamp on a Fiat Scudo, first ensure that the underlying issue has been addressed. Then, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds, then turn the ignition off. This should reset the motor lamp; if it persists, consider consulting a professional for further diagnostics.
What else can I help you with?
How do you Fiat doblo service and oilchange light reset?
according to autodata service lamp can only be reset using suitable diagnostic computer Dr.Pedro VolksWagen service technician
How do you reset lamp hours on a Toshiba TLP-XD2000?
To reset the lamp hours on a Toshiba TLP-XD2000 projector, first ensure the projector is powered on. Navigate to the "Lamp" menu using the remote or the projector's control panel, then select the option to reset the lamp hours. Confirm the reset when prompted, and the lamp hour counter will be set back to zero. Be sure to check the user manual for specific button sequences, as they may vary.
How do you reset the oil change lamp on a 2007 town and country?
To reset the oil change lamp on a 2007 Town and Country, locate the reset button on the instrument panel. Hold the button down for 5 seconds.
How can you reset your maintenance reminder light on your 1995 Ram 3500?
The SRI lamp may only be reset with the use of a DRBII scan tool, or equivalent. If this is not available, you will have to take the vehicle to a properly equipped shop for them to reset the lamp.
Why doesnt brake lamp failure lamp on dash of 94 Honda Accord not reset after bulb replacement?
Remove the negative battery terminal (-) for about 15 minutes and most codes will reset.
How do you reset the lamp hours after you change the bulb?
To reset the lamp hours after changing the bulb, locate the reset option in the projector or device's menu. This is often found under settings, maintenance, or lamp settings. Use the remote control or on-device buttons to select the reset option, then confirm the action. Refer to the user manual for specific instructions related to your model, as the process may vary.
How do you reset the brake lamp failure message?
replace the burnt out bulb
How can you reset malfunction indicator lamp?
To reset your malfunction indicator lamp start your car then you hire fps russia to blow up your piece of terrible car and buy a new one simple actually.feces
What is electrical motor type test?
test in lamp
How do you reset Toyota hilux 166R t belt indicator lamp?
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
How do you reset the tail lamp indicator on a 1998 Lexus LS400?
There is no reset for taillamp failure relay. If there is a fault the message will continue to be displayed www.lextechautomotivellc.com
How do you reset the Brake Lamp Light on a Acura?
To reset the Brake Lamp Light on an Acura, first ensure that the brake fluid level is adequate and that there are no issues with the brake system. Turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. This should reset the Brake Lamp Light; if it remains on, check for any underlying issues with the brake system.
