0
Timing Belt Warning Indicator Reset Procedure
a) Turn ODO/Trip Meter to ODO and turn the ignition switch to OFF
b) While pressing the trip switch, turn the ignition switch ON and hold for 5 seconds.
c) Release the trip switch, then press the trip switch again within 5 seconds.
d) Transfer to T-Belt mode. The initial setting value "15 (0,000km)" is displayed.
HINT:
Every press of the trip switch adds 10,000kms and the meter reading returns to 10,000kms when 200,000kms is reached.
If the switch is not operated for more than 30 seconds, the setting value will not be changed, the display screen turns to ODO, and the mode return to normal
What else can I help you with?
How do you reset timing belt indicator light on Toyota hilux D-4D 2006?
timing belt light hilux 1kd
How do you reset the timing belt light on 2002 hilux d4d model no kdn165 2494cc engine?
how to reset toyota kdn165 timing light
How do you reset the timing belt light on 2.4td 1994 Toyota Hilux?
see hpoc.co.uk for a post on this very question
How to turn off timing belt light on Toyota hilux?
To turn off the timing belt light on a Toyota Hilux, first ensure that the timing belt service has been completed. Then, use an OBD-II scanner to reset the service light, or if you don't have one, turn the ignition to the "On" position without starting the engine and press the gas pedal three times. This should reset the light. If the light persists, consult a mechanic for further diagnostics.
How do you reset timing belt light on 2003 Toyota hilux 2.8 diesel?
To reset the timing belt light on a 2003 Toyota Hilux 2.8 diesel, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds to reset the light. Turn off the ignition and then start the engine to ensure the light is reset. If the light remains on, you may need to consult the vehicle's manual or a professional mechanic for further assistance.
How do you reset timing belt light on Toyota hilux D4d 2000 model?
To reset the timing belt light on a 2000 Toyota Hilux D4D, you typically need to locate the trip meter reset button on the dashboard. Turn the ignition key to the "ON" position without starting the engine, then press and hold the trip meter reset button until the timing belt light turns off. If the light does not reset, you may need to disconnect the battery for a few minutes and reconnect it. Always consult the owner's manual for specific instructions related to your model.
How do you turn off timing belt light on a 1993 Toyota hilux?
To turn off the timing belt light on a 1993 Toyota Hilux, first, ensure that you have completed any necessary maintenance related to the timing belt. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the battery, and the light should be off. If the light remains on, consult a mechanic for further diagnostics.
How do you reset the fuel filter warning light off for Toyota hilux?
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
How do you reset the timing belt light on 2.8d 1989 Toyota Hilux?
there is a little bung on your dash board beside your trip meter pull out bung and deep in there you will see a little button get a needle and push the button easy as that timing light out
How do you reset t belt light on Toyota hilux diesel 2008?
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
How do you reset a timing belt light for a Toyota helix L 2004?
To reset the timing belt light on a 2004 Toyota Hilux, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn off the ignition and start the engine to check if the light is reset. If the light remains on, the procedure may need to be repeated or checked for any underlying issues.
How do you reset the timing belt light on a Toyota vigo 2006 model?
how to reset the vigo timing belt warning light
