Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
Should reset when fluid added--may be defective sensor in reservoir
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
To reset the low washer light on a 2004 Lincoln Town Car, first ensure that the windshield washer fluid reservoir is filled. Then, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds, which should reset the warning light. If the light remains on, check for any leaks or issues with the washer system.
To reset the low washer fluid indicator on a 1993 Mitsubishi 3000GT, first, ensure that the washer fluid reservoir is filled with the appropriate washer fluid. After filling, turn on the ignition without starting the engine and then turn on the windshield wipers briefly; this can help reset the indicator. If the light remains on, disconnecting the battery for a short period may also help reset the system. Always consult your vehicle's manual for specific instructions.
its not a light,reset with your key
why the abs light come on and how rest
To reset the check engine light on a 1998 Honda Civic located the blue 15 amp fuse in the engine bay fuse box. The fuse is labeled ECU, and will reset the check engine light when removed.
Should reset itself when fluid is added unless sensor is bad
go reset it. It's easy and just 15 seconds job.
On my 2002 Passat there is a reset button on the underside of the Windshield washer arm. Pushing that will clear the trip computer settings, per display.
You can't reset the fuse, it has to be replaced. Make sure to use the correct amp,it will be on the fuse. Example 10, 15, 20 etc.