Push the set button and within 10 seconds press the seek and scan buttons.
To set the clock in a 2010 Dodge Caravan, first, turn on the vehicle's ignition. Press and hold the "Hour" button until the hour display starts blinking, then use the "Minute" button to adjust the minutes. Once the correct time is set, press the "Hour" button again to save the changes. The clock should now display the correct time.
To set the clock on a 2006 Dodge Grand Caravan, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the radio until you see the clock display. Use the "Tuning" knob or the "Seek" buttons to adjust the hours and minutes, then press the "Menu" button again to save the settings. Make sure to check the AM/PM setting if your model includes it.
If it is like my 1991 caravan, turn the key on, hit the "Set" key so "P" appears on the screen, then push the select key, and you are now on time settings, use your dial to dial in the time and hit "set" once finished.
To reset the mpg, and timer. You need to press and hold both buttons for about 5 to 6 secs.
the clock on my 1996 Dodge Intrepid has an H and M on the right top. Use a pen or paperclip after turning the key until the power comes on, but before ignition. H changes hours and M changes minutes.
You have to gently lever out the clock (use a spoon) and the adjustment is on the reverse
Clock spring Fuel rail
the clock is set for time
Try this. Turn radio off. Push and hold down power button. Push scan and/or seek up or down to set clock. This works with some Chrysler radios. TURNN RADIO OFF PUSH AND HOLD VOLUME NOB USE SEEK AND SCAN FOR HOURS/MIN.
use a pen and adjust the hours and minutes on the radio by pushing in the switches in the two little holes on the right side of the radiojust next to the right knob
'how do I set the clock on a 2001 mercury mountaineer'