reset switch by Honda or acura part number 07paz-oo10100
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
press the reset and select switch at same, turn ign. key to II (On) and wait 10 seconds
To turn off the maintenance light on an Acura MDX, start by turning on the ignition without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then back on to verify that the maintenance light has been reset. If it remains on, repeat the process.
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" for the maintenance reminder you wish to clear. Finally, confirm the reset, and the maintenance light should turn off.
put the key in and turn one time then hold the select button and the one below it at the same time and turn the key a second time
put the key in and turn one time then hold the select button and the one below it at the same time and turn the key a second time
All you have to do is turn the key in the ignition to "power on" (without starting the car) while holding the "reset" and "select" buttons on the instrument panel. Hold for several seconds. the next time you start the car, the maintenance require light will be gone.
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.