it's easy to change fan belts that is connected to the alternator two bolts
What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.
You have to take off the alternator to be able to reach the fan . After you should oiul the belt to slip on the fan very easy . Put the alternator back on and your ready to go .
Dead easy, take drive belt off power steering pump. Slacken off alternator's two 13mm nuts, push down on spring loaded alternator, take off alternator belt, put on alternator belt. Reverse process. Job done
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Yes.
Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.
You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.
You will need to loosen the tensioner pulley. Put the alternator belt on. Push the tensioner pulley to the left until the alternator belt is tight. Tighten down the tensioner pulley.
Is the timing belt on a j30 infinity run the alternator
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
Because your alternator's not putting out any juice. It could be the alternator, the belt or the voltage regulator. If it's the belt that's pretty easy--get one and put it on. Either of the other two and you'll need a rebuilt alternator because the regulator is inside the alternator case.
You need to remove the serpentine belt and unbolt the old alternator. Bolt on the new one and reinstall the belt. Its that easy.