A 1.5-ton air conditioning unit typically has a cooling capacity of about 18,000 BTUs (British Thermal Units) per hour. This is based on the conversion that one ton of cooling capacity is equivalent to 12,000 BTUs. Therefore, a 1.5-ton unit provides efficient cooling for medium-sized spaces.
The Amps means the volume of flow of electricity. The Amps depends on its BTU (British Thermal Unit). BTU is the unit to measure the energy that is consumed to perform some Air Conditioner. 12000 BTU Air conditioners uses 5 to 6 Amps. 18000 BTU Air conditioners uses 9 to 10 Amps. 12000 BTU air conditioners also called 1 Ton AIR CONDITIONER and 18000 BTU Air conditioners are called 1.5 Ton and so on. The 2 Ton or 24000 BTU Air conditioners use 15 Amps to work.
it is a 4 ton unit
5000 BTU's should work for a room that size.
1 billion BTU = ~1.055056e12 joules
read the manufacturers logo on the side of the unit and weigh the charge
To convert BTUs to kilowatts, divide the number of BTUs by 3412. 650,000 BTUs is equivalent to approximately 190.4 kilowatts.
The latent heat of vaporization of water at 212 degrees Fahrenheit at atmospheric pressure involving only vaporization and no saturation is 970 BTU/lb, so to evaporate 15 lbs of water we need 970 x 15 = 14550 BTU's
135 btu
This unit is good for a room size of 10 x 15 and should fit most windows.
For a 1 ton air conditioner unit, the circuit breaker size typically ranges from 15 to 20 amps. The exact size needed will depend on the specific model and requirements of the air conditioner, so it is best to consult the manufacturer's specifications or an electrician to determine the appropriate circuit breaker size for your unit.
It is equal to 3360.93 pounds approximately. Kilogram is the metric unit and pound is the imperial unit for mass. 1 Kilogram is 2.204 pounds. So we multiply kg by 2.204 to get the equivalent pounds.
A 16 SEER 3-ton condenser typically draws around 15-20 amps during normal operation. However, the exact amperage can vary depending on factors such as the efficiency of the unit and the specific operating conditions.