I've just changed a rear rotor of my 1996 Buick regal. 1. Jack the car up and Remove the wheel 2. Use a 19 socket wrench (same size with wheel nut wrench) to loose 2 Caliper nuts (it is difficulty, they are too tight, need a hammer) 3. Remove caliper 4. Remove the rotor 5. Clean surface then assemble them Sorry, I am a new immigrant with a pool English. But it is really so easy to change a rotor. It is the first time to change it for me, it took me 40 minutes but save $100. I bought a new rotor at Canadian Tire, just 24 dollar.
Should be the "peel off" type Remove wheel Remove 2 caliper mounting bolts Slide caliper off rotor Slide rotor off hub
Do you mean rotor? If so, remove the distributor cap and remove the old rotor and install the new one. Simple repair.
Specs 98 Buick Park Ave rear pads
not always
Should be of the "peel off" type Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
Check the coil, coil wire, rotor, and distributor cap.
how do i change starter on buick 2002 rendezvous
To change the front wheel bearing on a 2007 Buick Lucerne, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor to access the hub assembly, then remove the hub by unbolting it from the steering knuckle. Replace the old bearing with a new one, reassemble the hub, rotor, and caliper, and finally, reinstall the wheel. Ensure everything is torqued to manufacturer specifications before lowering the vehicle.
The minimum thickness will be stamped on the hub of the rotor. If you dont have a micrometer, a good rule of thumb i use is if you have to compress the calipers to get them to slide off the rotor you usually need new ones.
on what
How do you Change a fuel pump on a 1985 Buick Century?
How to change brake lines on a 1991 Buick Lesabre?