Get a manual on your car to do the job right.
To replace the filter in the blower assembly of a 1988 Mighty Max pickup, first, disconnect the battery to ensure safety. Remove the blower motor cover by unscrewing the necessary screws, then carefully detach the blower motor itself to access the filter. Replace the old filter with a new one, ensuring it fits snugly, then reassemble the blower motor and cover, and reconnect the battery. Finally, test the blower to ensure it operates correctly.
Heater core? Inlet or outlet hose fitting at heater core?
Heater core leaking?
It's located under the dash in the pass. side floorpan. Remove the screws that hold up the trim plate, that will reveal the bottom of the motor, it is removed like a twist-lock, 1/4 turn and it should drop out.
Most likely a failed blower resistor.
you turn it to the west
i need to know how to replace the heater core on my 1992 s-10 pickup
under the left front tire
Under the dash on the passenger side.
no you don't have to its actually like just the hoses and the blower is under the dash
Start the car, turn the heater/blower on full, The hose that is the hottest is the Inlet. The coolest is the Outlet.