Line the key up with the bump in the ignition face (second position away from the driver) and try pulling it out while wiggling the shift lever in park.
Most likely the computer has detected a malfunction and set a code. Have the system checked for codes.
That usually is an indication of a broken wire in the door harness.
how to remove key stuck in ignition switch in Chevy colbalt
Well, it sounds like the chip that is in your key may have broke or got stuck on a part of the ignition. I had that problem. This happened not long after I had had to have the ignition replaced?!?
Check the switch to see if anything is stuck in it. If the switch is otherwise fine, it is a problem with the electrical system. Open the fuse box and locate the fuse for the tailgate switch. Replace the fuse and try again.
I just had this problem last night and I ended up having to take it to the dealership because the key just would not move at all. They had to replace the ignition in my car which ran about $300.
They were brought there by a creature known as "The Caretaker" who was looking for a mate.
There should be a lock on the ignition a push button that you push and turn to remove the key
Turn the ignition off.
NO
Bad gauge or stuck float in tank
get a new lock