0
Remove all spark plugs. Turn the engine by hand until the #1 plug (front of engine driver's side) is at top dead center on the compression stroke. The rotor will now be pointing to the #1 plug location on the cap.
Remove all spark plugs. Turn the engine by hand until the #1 plug (front of engine driver's side) is at top dead center on the compression stroke. The rotor will now be pointing to the #1 plug location on the cap.
What else can I help you with?
Where is the number one and number three located on a 1977 Chevy 350 distributor cap?
18436572
Where is number 1 on the distributor cap for a 1996 Chevy 350 EFI?
at 11 Oclock
The firing order on distributor cap for 77 Chevy 350?
18436572
Which position is number 1 on the distributor cap of a 1995 Chevy Z71 350?
#1 will be the first hole past the cap's mounting screw on the left side of the distributor, going clockwise.
What prong on distributor cap does number one wire go on a 1995 chevy 350?
You can find out in the repair manual for you vehicle.
Where is the ignition module on 1970 Chevy C10 with a 350 that has a HEI distributor?
under the rotor on the inside of the distributor cap
How do you check to see if distributor is 180 out on a Chevy 350 small block?
get the compression stroke up on the number 1 spark plug and look at the rotor inside the distributor cap to see if it points to the number 1 wire on the cap
How do you get the distributor gear aligned 1980 Chevy 350 4x4 auto?
Align the rotor with the number one position on the distributor cap, then with the engine at TDC insert the distributor. There may be a mark on the outside of the distributor to help.
How do you set the distributor cap for a 65 Chevy 350 v8?
There is a notch in the distributor housing. It can only go one way.
Which way does the rotor turn in the distributor on a Chevy 350?
Rotor Under Cap Spins: Clockwise
Is it possible to install a rotor cap backwards on a Chevy 350 distributor hei?
I DON'T KNOW!
Where is the coil on a 1992 Chevy 350 G20?
It is on the back of the intake manifold just in front of the distributor. If it is a HEI vehicle it will be in the center of the distributor cap. (distributor cap will look larger than normal)
