0
What else can I help you with?
What is the pressure plate and flywheel torque for a 1990 ford ranger?
Pressure plate to flywheel bolts - 24 ft/lbs
What happens if you over torque pressure plate on 91 s10?
You could stretch the bolts, strip the threads out of the flywheel or break the bolts off in the flywheel.
What are the Torque specifications for a clutch pressure plate on a 96 ford ranger?
pressure plate to flywheel bolts - 15 to 24
What are the Torque Specs on the Nissan 350Z flywheel?
25 ft lbs on pressure plate and 50 Ft lbs on the flywheel bolts. use locktite
What are the torque specs for Honda flywheel and pressure plate?
I believe that these specs do vary from model to model, but here are the specs for a 97-01 Prelude. Pressure plate bolts - 19 lb ft Flywheel bolts - 76 lb ft
Do you have to torque the bolts on your pressure plate for your 1986 Pontiac Fiero GT and if so at what lbs?
Yes, you have to torque everything on the drivetrain correctly. The manual calls for 15 ft-lb (dry and clean) on the pressure plate-to-flywheel bolts.
How do you replace a flywheel on a 1991 Toyota Celica?
Separate the engine/transmission; either pull the engine or transmission, whichever is easier for you. If it's an automatic, disconnect the torque converter from the flywheel. You can get to the bolts through the dust cover.After the engine/transmission are separated, if it's a standard, remove the pressure plate/clutch disk.pull the bolts that hold the flywheel and it should fall off in your hand.
Do you have to drop the transmission to get to the flywheel bolts?
Torque converter bolts No. Fly-wheel bolts YES.
What is the torque on a integra flywheel bolts?
75.9 ft lbs
How does the torque converter hook up to the flywheel?
Usually with bolts.
Complete torque and valve settings for a Toyota Hilux 2.4D 2L Engine flywheel bolts?
Oh, dude, you want me to give you the complete torque and valve settings for a Toyota Hilux 2.4D 2L Engine flywheel bolts? Like, I don't have that info memorized, but you can easily find that in the car manual or online. Just make sure to torque those bolts properly so your flywheel doesn't go flying off!
What are the torque specs for eclipse flywheel and pressure plate?
I know on a 95 GSX the flywheel bolts are 55 ft. lbs. and the pressure plate is 11-16 ft. lbs. This information is from Alldata and may be different for your particular model.
