you must have disconnected the safety switch. double check your connections and see if every thing is cannecteed
You have to make sure you are in NEUTRAL first!
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
You have to remove the door panel to access handle screws. After that you have to disconnect pulling rods and replace the handle with another one.
You have to remove the door panel...not easy, but do-able. Once that is off you can remove the door handle and replace it.
First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.
To replace a door handle, first remove the screws on the existing handle and pull it off. Next, align the new handle with the holes and screw it in place. Test the handle to ensure it functions properly.
You remove it and replace it...
You will need to remove the door panel of your 1995 Toyota. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
2001 nissan how do you remove the nissan emblem to access replace broken handle
To replace interior Ford fusion door handle you must remove the door panel, take off the old handle and replace with the new one, and then replace the panel back on the door frame.
Remove the inside door panel from your 1994 Chevrolet. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.