answersLogoWhite

0

What else can I help you with?

Related Questions

Where is the ignition and distributor located on a 1990 Chevy Celebrity?

The 1990 Chevy Celebrity engine is distributorless, the ignition is handled by a combination of the engine control module(computer) and the ignition control module. You did not mention which engine the car has. If your car has the 4 cylinder engine the ignition control module is below the intake manifold at the rear of the engine. You can follow the spark plug wires to it. The coils are mounted to the ignition control module. If your car has the V6 the ignition control module is near the starter and again you can follow the spark plug wires to it. Again the coils are mounted to the ignition control module.


How do you change the ignition control module in a 1989 Chevy Celebrity?

Which engine does your car have?


Where is the ignition control module 1997 Chevy cavalier 2.2 L?

where is the ignition control module loacted on a 1997 chevy cavalier


How do you change the ignition control module in a 1988 Chevy Silverado 5.7 L?

How do you change the ignition control module in a 1988 Chevy Silverado 5.7L


Have a 88 Chevy Celebrity engine will not restart after hot?

I would suspect a failing ignition control module.


Where is the ignition control module located an a 1983 Chevy blazer?

Where is the control module located on the 1983 Chevy blazer


How do you reset time on a 87 Chevy Celebrity?

All 1987 to 1990 Chevy Celebrity engines use distributorless ignition. Timing is controlled by the engine control module in conjunction with the ignition module. There is no provision for adjustment.


Where is the ignition control located on a 1981 Chevy Blazer?

Depending on what type engine you have, the ignition module may be an integral part of the distributor cap.


Where is the ignition control module located on a 350 vortex engine in a 1997 chevy 1500 4x4?

69 :3


How do you change the Ignition Control Module in a 1995 Blazer S-10?

Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.


Where is the ignition control module for 1997 Chevy Cavalier 2.4L?

The ignition control module is located under the electronic ignition control module cover. On a 1997 2.4L cavalier, it will have the words 2.4L twin cam stamped on it. It is on the top of the engine and is held in place with four bolts. This cover must be removed to get to the spark plugs.


How do you set the timming on an 87 Chevy Celebrity a 2.8 engine?

Timing on a 1987 thru 1990 Chevy Celebrity 2.8/3.1 engine is controlled by the ignition control module along with the engine control module. There is no provision or specification for manually adjusting the timing on these distributor-less models.